东莞市中制自动化设备有限公司  

writer:点胶机厂家 Click:181

Automatic glue sprayer is a social problem that everyone pays special attention to in the health industry at this stage. It is basically fully automatic. At this stage, some medical instruments have advantages and disadvantages in dispensing production, a.

writer:点胶机厂家 Click:253

In the circulation process of glue and liquid, the liquid layer adjacent to them also moves at a constant speed, and the friction resistance formed between the two layers of liquid is called glue viscosity. Stable glue viscosity is very important for the .

writer:点胶机厂家 Click:211

In recent years, the full-automatic dispenser has shown the advantages of time-saving and labor-saving use, which will eventually play a very important role in todays processing and manufacturing stage. Therefore, the price of dispenser is quite different.

writer:点胶机厂家 Click:131

Many parts (accessories) of automobile manufacturing need the help of dispensing equipment. This time, we want to explain the function of hot melt dispensing machine in product manufacturing in a precise and effective way of hot melt sealing Desktop hot m.

writer:周周 Click:134

Due to the special properties of hot-melt adhesive, it needs to be heated at a certain temperature before it can become a fluid for filling and sealing. Therefore, a special hot-melt adhesive dispenser is needed for glue control. Some users have doubts ab.

writer:周周 Click:131

There are many precautions for the silicone dispenser, which will be described below 1. When using the silicone dispenser, the staff should consider the precautions of the silicone dispenser, because the dispensing needle of the dispenser is very small an.

writer:周周 Click:217

Because the cap is very small, it needs corresponding equipment to apply hot-melt glue to the cap. Usually, the full-automatic hot-melt glue dispenser is adopted. Put the bottle cap in the place of production line. In the transportation process, through o.

writer:周周 Click:252

The full-automatic dispensing machine is a three-axis active equipment. With the addition of special glue control equipment, it can achieve uniform and stable dispensing, dot, circle drawing, and three-axis collaborative application of three-dimensional p.

writer:周周 Click:131

Nowadays, in the LED industry, the LED dispenser also has a very large area, covering many consumer areas, such as electronic lighting industry, mechanical hardware industry, automobile manufacturing industry, etc. the characteristics of LED dispenser are.

writer:点胶机厂家 Click:151

The inspection skills of dispensing quality of high-speed dispenser: beating, liquid crystal detection, identification, pressurization, acoustic resistance and ultrasonic method. For sealed pressure bonding parts, pressure sealing inspection can be carrie.

writer:点胶机厂家 Click:168

1. If the dispensing needle is reused, multiple mixing interference will occur. The manufacturer of UV glue will be very strict and control the quality of UV glue from beginning to end. When the external dispensing needle or fluid pipeline is connected, a.

writer:点胶机厂家 Click:244

The amount of glue dispensed depends on the following key points: glue viscosity, load, glue supply time and instant break, so many factors need to be considered in order to complete high viscosity glue dispensing. High viscosity filler According to the a.

writer:点胶机厂家 Click:185

Heat to remove the gelled glue on the dispensing needle, because the gelled glue and led conductive silver glue have a very fast solidification efficiency. Once the dispensing needle of the high-speed dispensing machine with gelled glue is not well select.

writer:点胶机厂家 Click:223

In many areas, the dispensing process is also called gluing or even dropping. That is to apply electronic glue, oil or even other liquids to the products, so that the products can have the effects of sticking, potting, insulation, stability, surface smoot.

writer:点胶机厂家 Click:199

The application of the automatic dispensing machine involves all aspects. It is applicable to the spot application of glue and also supports the control application of paint materials. This time, the difference between paint and paint will be explained, w.

writer:点胶机厂家 Click:268

There are many glue filling methods. Usually, there are two-component glue filling methods (two-component epoxy resin, two-component polyurethane, two-component silicone rubber and other two-liquid resin materials) Floor type automatic glue filling equipm.

writer:点胶机厂家 Click:176

Electronic equipment has always been the most critical output standard of automatic dispenser manufacturers. The manufacturers of automatic dispenser and automatic dispenser are willing to compete for the electronic equipment industry. The most important .

writer:点胶机厂家 Click:278

How to choose to use my factorys intelligent automatic dispensing machine? Filling silicone dispenser When purchasing such products, we can follow a lot of factors. Its basically how to carry out the dispensing machine for the factory. At present, such pr.