东莞市中制自动化设备有限公司  

writer:点胶机厂家 Click:227

Some small devices or electronic parts need special foam glue to be filled and covered for protection. The foam glue on the coated part of the shell has a good protective effect after solidification. The operation of foam glue on crack repair is also not .

writer:点胶机厂家 Click:217

Some small devices or electronic parts need special foam glue to be filled and covered for protection. The foam glue on the coated part of the shell has a good protective effect after solidification. The operation of foam glue on crack repair is also not .

writer:点胶机厂家 Click:165

Seal dispensing machine can be used in filling and packaging of electronic products. In fact, this automatic device can also be used in the process of garment dispensing to promote the value of garment appearance with the advantages of high precision, hig.

writer:点胶机厂家 Click:303

Intelligent CCD visual dispenser can improve the efficiency and quality of production line. In fact, the high degree of intellectualization and rigor of equipment control the common problems of dispensing. Precision controlled CCD visual system solves the.

writer:点胶机厂家 Click:282

Controlling the application of white latex in gluing and bonding is recommended to use automatic control of white latex dispensing machine for auxiliary use. The question of how long the white latex dries is often questioned in the process of user applica.

writer:点胶机厂家 Click:298

In fact, automatic white latex dispenser can also be used in the process of carton bonding. Operators can set parameters, and it can also be used in the process of gluing with white latex. In addition to carton bonding, it can also be used in the producti.

writer:Glue sealant Click:160

The main application of glue filling equipment is automatic dispensing machine. This paper recommends dispensing equipment with visual function. It has more advantages than similar equipment in terms of glue coating area and glue flow speed control. The p.

writer:点胶机厂家 Click:251

Dual-station 4331 dispensing machine is an automatic equipment for dispensing glue on batch products. When operating, attention should be paid to the influence of glue problems. Control adjustments should be made mainly from the aspects of use and operati.

writer:点胶机厂家 Click:174

Thread adhesives are anaerobic adhesives and liquid flowing adhesives at normal room temperature. When the flowing threaded adhesives are separated from air, they can be quickly polymerized and solidified by catalysis. The strength of glue used for point-.

writer:点胶机厂家 Click:177

Many products in the manufacturing industry need dispensing machine to finish sealing and packaging, and the demand for dispensing for semi-finished products is high. Desktop-type 331 dispensing machine can be used in batch automation production line to s.

writer:点胶机厂家 Click:269

For semi-finished products, dispensing and gluing can be done manually either by automation equipment or by manual method. The mainstream operation mode is manual control of 2121 dispensing valves and other types of hand-controlled glue valves to finish m.

writer:点胶机厂家 Click:175

There are many kinds of reasons that affect the dispensing of semi-finished products. There are many feedback about the problem that the rubber valve does not glue or the rubber cylinder does not glue. The reason why the rubber cylinder does not glue is r.

writer:点胶机厂家 Click:239

It is indispensable to heat the power supply withstanding the load voltage for a long time. The way of heat dissipation of power supply can be appropriately dispensed by dispensing glue, and the same is true for the main board dispensing. By dispensing gl.

writer:点胶机厂家 Click:246

At present, the technology of sealant filling has reached a new height. Many kinds of products should use the technology of sealant reasonably to seal. The proportion of sealant must be controlled well. There is a contrast between the advantages and disad.

writer:点胶机厂家 Click:264

LED soft lamp with soft strip glue has specific requirements for selecting machine, especially 6M soft lamp strip needs good glue quality, high-speed glue dispenser with good versatility is mainly used for fine glue dispensing, which is not fully applicab.

writer:点胶机厂家 Click:205

There are many kinds of equipments to finish gluing in production line. According to the different equipments selected in the industry, the reason why the value of visual gluing equipment is outstanding is related to its functions. The excellent effect of.

writer:点胶机厂家 Click:235

Electric box full name distribution box, mainly for circuit components power distribution, the main point of electric box dispensing is foam glue, foam glue filling has the role of sealing protection, to strengthen the continuous and stable use of the cir.

writer:点胶机厂家 Click:215

There are many kinds of noctilucent lamps, the most common is the outdoor fishing or picnic lighting lamps, which have high illumination intensity and long illumination time. They mainly come from the brightness of noctilucent lamps coated with colloidal .