Customized high speed dispensing machine, glue machine!

东莞市中制自动化设备有限公司  

Dongguan CNAUTO Automation Co., LTD.

18929475867

31

2019-08

writer:点胶机厂家 Click:298

AB dispensing machine uses two-component glue. In the control of glue discharge, it adopts more complex process. Intelligent and intelligent operation mode provides great convenience for dispensing. Small AB dispenser for glue coating 1. The main point of.

30

2019-08

writer:点胶机厂家 Click:229

In dispensing, the size of the adhesive point must be controlled according to the base material to be dispensed, and it should not be less glued or overflowed. The following dispenser manufacturers begin to discuss how to control the size of the dispenser.

30

2019-08

writer:点胶机厂家 Click:259

Rubber Gun Leakage of Dispenser Fittings Spray dispensing gun Aerodynamic Gun 1) Inlet air leakage: The connection between air pump and rubber gun air outlet is not sealable enough. You can choose to change the joint or connect the trachea to the rubber g.

29

2019-08

writer:点胶机厂家 Click:272

How to prevent glue precipitation during dispensing? 1. Pressure barrel adds stirring function. When the machine opens, the stirring rod always rotates, stirring the glue to prevent the glue from precipitating. In addition, the stirring rod should have a .

28

2019-08

writer:点胶机厂家 Click:243

The dispenser always dispenses glue. The problem may be that the quality of the dispensing valve is not closed, the seals are worn and corroded, the glue is too thin, the pressure is too high, and the needle diameter of the dispensing machine is too small.

23

2019-08

writer:点胶机厂家 Click:280

Manual dispensing machine belongs to the field of semi-automatic dispensing machine, and its operation flexibility is not high. Generally, dispensing products of various types and specifications are seldom used. In many facilities, dispensing is not suita.

22

2019-08

writer:点胶机厂家 Click:242

Attentions in the use of glue filling machine are gradually increasing with the continuous use of mechanical production in industrial production, and some control abnormalities listed in the process of mechanical control are also gradually emerging. The f.

21

2019-08

writer:点胶机厂家 Click:247

Difference between dispensing machine and glue filling machine The dispenser is usually used for a small amount of precise glue filling. The glue machine usually refers to a large amount of glue. So these two names sometimes differ, but sometimes they are.

17

2019-08

writer:点胶机厂家 Click:204

After-sales service has become a key role in the market competition of automatic dispensing machine. With the rapid development of Chinas economy, the development situation has changed, and the pace of various infrastructure construction is also accelerat.

13

2019-08

writer:点胶机厂家 Click:194

In recent years, domestic dispensing machine has been widely used, and the demand for equipment from customers has begun to diversify, and has followed various types of dispensing machine. Apparently, it is a booming industry, but it is very difficult for.

08

2019-08

writer:点胶机厂家 Click:205

General dispensing machine has automatic reset function. When the system is opened, it will automatically restore to the setting state of subsequent operations. However, if the system does not automatically reset after boot-up, it indicates that there are.

07

2019-08

writer:点胶机厂家 Click:177

With the development of society, science and technology are also developed, and now manual production can not meet the needs of enterprise assembly line more and more. Instead, industrial automation can better liberate productivity, improve enterprise pro.

06

2019-08

writer:点胶机厂家 Click:165

Do you remember the traditional dispensing method? Every process must be accountable to its employees. Product dispensing must be completed by several people. For so many manpower in the process of product, it will definitely bring pressure to the enterpr.

02

2019-08

writer:点胶机厂家 Click:226

What is the working principle of dispensing machine? Dispensing is the use of compressed air to point red glue through a special dispensing needle to the substrate. The size, quantity, time, pressure pipe diameter and other parameters are used to control .

31

2019-07

writer:点胶机厂家 Click:249

Three-axis dispensing system is now a relatively common high-speed dispensing machine, so what is a three-axis dispensing machine? As the name implies, it has three axes, suitable for X, Y, Z and other ordinary plane work, three-axis type of high-speed di.

23

2019-07

writer:点胶机厂家 Click:228

The application of high-speed dispensing machine is in an upgraded state with the need of dispensing and other aspects. Some special industrial applications need to be strengthened by environmental protection and high-temperature glue. Therefore, the glue.

16

2019-07

writer:点胶机厂家 Click:297

Usually, the curing rate should be effectively accelerated by appropriate ways after using automatic equipment to coat or dispense glue. In this regard, the main application needs are batch production, such as mobile phone frame glue and metal buckle coat.

12

2019-07

writer:点胶机厂家 Click:262

Visual inspection device is an auxiliary device for scanning and positioning. After mounting the device, the visual dispensing machine can operate without special fixture reinforcement, the precision of scanning and positioning dispensing is high and stab.



中制自动化设备有限公司全力为用户打造各种实用性强的高速全自动点胶机 大型高速点胶机 落地式高速点胶机