Sponge is a kind of elastic material with strong water absorption. The existence of this property may affect the adhesion of sponge to metal. After bonding, ordinary glue may be absorbed by sponge and partially corroded. Therefore, the selection of glue s.
Instant glue is a kind of curing adhesive that can be used for sealing strip butt joint. When it reaches the curing effect, it is resistant to pulling and is not easy to loosen and fall off. After curing, the adhesive point has the advantages of no yellow.
As the automatic manufacturer of dispensing machine, Zhongzhi will provide an adhesive selection method for users to choose, because the operation quality of the selected equipment largely depends on whether the selected adhesive has good quality and good.
This time, we will introduce the technical knowledge about the repair of conveyor belt. The most common type of conveyor belt is made of rubber. In case of long-time transportation, there will be some problems such as wear, scratch or crack. Therefore, th.
This time, we will introduce the link and operation mode of PC lampshade bonding. PC is polycarbonate. Based on this, the lampshade made of this material has good impact resistance, good heat resistance and low temperature resistance. Therefore, it meets .
This time, we give a brief introduction to the small earphone dispensing. This link needs to be combined with the automation equipment and put into mass production. At present, we consider using a high-speed dispensing machine to complete the production t.
Rubber bonding stage can be combined with high-speed dispenser to complete fast and stable precision bonding, so how to ensure that rubber products have better bonding effect and strength? The performance of the dispensing machine is a key link, of course.
I think you are familiar with bolt as a fixed component. It is a kind of detachable fixed connection mechanical part, which can only be fixed when it is matched with nut in many times. Bolt gluing is a step to play two roles. After this technical adjustme.
LED driving power supply has high reliability and efficiency, and the development of the whole industry seems to be moving at a relatively fast pace. This paper makes a brief introduction to the glue filling process of driving power supply. In order to ma.
Some outdoor or park LED display screens that can be waterproof and moisture resistant are available for citizens to visit and understand. Why these products can work normally in rainy days without being affected is mainly due to the technology of screen .
A helmet with good quality and can be recycled for a long time will have a relatively high demand. Driven by the one helmet area policy, the current helmet manufacturing and production stage is affected. Helmet painting is mainly to apply an appropriate a.
The quality of mobile phone board has a profound impact on the value of most smart phones, so many mobile phone manufacturers begin to pay more attention to the construction and mode selection of this module. The dispensing stage of mobile phone board is .
The use of automatic dispensing equipment in many fields has relatively key application components. The small edition of medium-sized manufacturing focuses on the precautions for safe operation of dispensing, which belong to the process that needs to be p.
Heating temperature of hot melt adhesive The application of high viscosity hot melt adhesive in the actual situation has been common. The high-speed dispenser needs to be able to control the hot melt adhesive filling bid, which needs to be matched with th.
The rectifier bridge has the function of converting alternating current to direct current in many electronic components, which is formed by the principle of unidirectional conductivity. This paper makes a supplementary introduction to the rubber filling s.
The surgical clothing is the protective clothing worn by surgeons for operation, which is helpful to reduce the gap of contact with pathogenic bacteria. In this system, we want to introduce the function of hot melt glue spraying on the surgical clothing a.
Generally, the branch part of the line will be placed in a junction box for management and placement, which is to be able to arrange it in various narrow spaces for control and use. After the junction box is filled with glue, it can be placed in a fixed p.
According to the needs of actual production, we will select high-performance automatic dispensing machine, which can quickly and effectively complete all kinds of high-efficiency production work only after adjusting the basic parameters. This time, we wil.