东莞市中制自动化设备有限公司  

writer:点胶机厂家 Click:245

Manual gluing mode is mainly applicable to the production of products with small demand. Operators can use manual gluing by connecting the controller of 2121 point valves with air source of air compressor. Compared with the automatic mode of 331 point dis.

writer:点胶机厂家 Click:192

There are many manual modes for dotting of silica gel ring paint. Relatively speaking, the efficiency and consistency of this mode are not good, so some production lines with large demand will choose to use automatic desktop 331 dispensing machine to comp.

writer:点胶机厂家 Click:292

The parts of dispensing machine should be of good quality and strong sealing to ensure stability. If the sealing of the application parts is not good or bad, the products will be directly fed back to the common problems such as the rubber cylinder does no.

writer:点胶机厂家 Click:259

The motherboard of mobile phone and computer is a complete circuit system. In production, glue is used to bond the components. Besides the reinforcement function, there are also some auxiliary effects of power supply and heat dissipation. The motherboard .

writer:Anaerobic Adhesive C Click:203

Anaerobic glue, also known as threaded glue, is a kind of inert glue that keeps normal in the air. Anaerobic glue cleaning refers to a way of rinsing with special solution to remove it. It is mainly used when repairing or removing it. Of course, sometimes.

writer:点胶机厂家 Click:203

The function of needle barrel is mainly used as an auxiliary tool for storing and dispensing the glue on the quasi-adhesive surface. The price of needle barrel on the market is high or low. The price of all stainless steel needle barrel is dominant. Compa.

writer:点胶机厂家 Click:313

The rising rate of bad products in product dispensing is mainly manifested in the weak stability of dispensing in application products. There are many factors affecting the stability of dispensing, including whether the parameters of automatic glue dispen.

writer:点胶机厂家 Click:232

Contact dispensing is a very common method of operation. Manual control of rubber drum or dispensing with automatic glue dispensing machine belong to contact dispensing mode. The two modes of operation need to be selected according to actual needs. In the.

writer:点胶机厂家 Click:303

Potentiometer is composed of resistor body and rotation. It is mainly used to obtain the output voltage which has a certain relationship with the applied voltage. Potentiometer dispensing link can be completed by automatic glue dispensing machine in batch.

writer:点胶机厂家 Click:316

The way to apply glue on products is simple and needs less preparation. The common way is to apply glue after holding brush manually, and also to use semi-automatic equipment to connect glue valves to hold glue inside products. There are many methods and .

writer:点胶机厂家 Click:318

There are many reasons for this problem. It is important for operators to pay attention to the appropriate ways and measures to deal with the breakage. This time, we will make a brief solution to the problem of breakage in automatic dispensing machine, su.

writer:点胶机厂家 Click:192

Mobile phone button dispensing mode or automatic dispensing equipment needs to be selected according to the actual situation. If the demand is low and the density demand is low, the key dispensing can be completed by manual operation. If the demand and pr.

writer:点胶机厂家 Click:232

There are many methods for automobile high-pressure pack glue filling. It is a method to select automatic glue dispensing machine for high-pressure pack glue filling. Users have different opinions on automatic equipment, such as whether intelligent glue f.

writer:点胶机厂家 Click:301

Visual dispensing machine has become the main reason for its outstanding demand in production control accuracy and other aspects. It has been applied in many manufacturing processes. Visual dispensing technology has played an important role in PVC sole di.

writer:点胶机厂家 Click:192

Plastic mould gluing can be carried out manually or automatically. The advantage of manual operation is that it can be carried out without too much preparation. However, the stability of gluing can be improved by choosing automation equipment. Therefore, .

writer:点胶机厂家 Click:283

Lightning arrester is a kind of surge protection in electronic circuit to avoid equipment being damaged. Most high-voltage equipments have lightning arresters to avoid damage. Lightning arrester filling requires special electronic filling glue. Therefore,.

writer:Visual gluing Click:2168

Visual glue dispensing is a function of 3000 glue dispensing machine. There are many products that need glue dispensing in electronic industry, such as electronic board, electronic chip and so on. The equipment with visual function is more practical for e.

writer:Glue back suction Click:332

Glue backdraft is the basic function of the glue filling machine. Now all the machines produced have backdraft function. The glue filling equipment can not be called without backdraft function. Why do you say so? Because the machine is different from the .